How to solve stoichiometry problems by tracking units

Blog › Exam Preparation

· by Julia Berens · 4 min read

Close-up of clear volumetric flasks in a laboratory, with blue markings and a softly blurred yellow and gray background.

When you learn how to solve stoichiometry problems, you do not need to memorize a different formula for every type of question. Start with a balanced equation, label the quantity you are given, and write down what the answer must measure. Then let the units tell you what to multiply by. For example, if a problem gives grams of calcium carbonate and asks for grams of carbon dioxide, the first conversion must remove grams of calcium carbonate, not grams of carbon dioxide.

Start with a balanced equation

Consider this problem: What mass of carbon dioxide forms when 25.0 g of pure calcium carbonate decomposes completely? The balanced equation is:

CaCO3 → CaO + CO2

Each side has one calcium atom, one carbon atom, and three oxygen atoms. The unwritten coefficient in front of each formula is 1. That means one mole of CaCO3 produces one mole of CO2 in this reaction. It does not mean one gram produces one gram. A mole of calcium carbonate has a different mass from a mole of carbon dioxide.

Check the atom counts before you copy a coefficient into a calculation. If the equation is not balanced, change only the coefficients in front of the formulas. Changing a subscript changes the substance itself. For example, CO and CO2 are different compounds, not two ways to balance the same equation.

How to solve stoichiometry problems one factor at a time

Write the starting quantity with both its unit and its chemical formula: 25.0 g CaCO3. Next, write the target: g CO2. Keep the formula beside every unit in your setup. The label tells you not just that you have grams or moles, but what you have grams or moles of.

  1. Convert the given substance to moles. Your first factor needs g CaCO3 on the bottom to cancel the starting label, so put mol CaCO3 on top. Using a molar mass of 100.09 g/mol, the factor is (1 mol CaCO3)/(100.09 g CaCO3).
  2. Switch substances with a mole ratio. You now have mol CaCO3, so that label goes on the bottom. Put mol CO2 on top. Take the numbers from the balanced equation: (1 mol CO2)/(1 mol CaCO3).
  3. Convert to the requested unit. You need g CO2, so put that label on top and mol CO2 on the bottom. Using a molar mass of 44.01 g/mol, the factor is (44.01 g CO2)/(1 mol CO2).

Put the factors in one line before calculating:

25.0 g CaCO3 × (1 mol CaCO3)/(100.09 g CaCO3) × (1 mol CO2)/(1 mol CaCO3) × (44.01 g CO2)/(1 mol CO2) = 11.0 g CO2

Read the labels from left to right. Grams of CaCO3 cancel first, then moles of CaCO3, then moles of CO2. Only grams of CO2 remain. Keep the intermediate digits in your calculator and round the final result to three significant figures, matching the given mass. The coefficients in the balanced equation are exact; they do not limit the precision of the result.

Skip conversions you do not need

The path through moles does not mean every problem needs three factors. If the starting quantity is already in moles, go straight to the mole ratio. If the question asks for moles, stop once you have moles of the requested substance. For the calcium carbonate example, if the question asked for the amount of carbon dioxide in moles, you would leave out the final molar mass factor and report 0.250 mol CO2.

Try a problem with unequal coefficients: 2 Mg + O2 → 2 MgO. How many moles of oxygen gas are needed to react completely with 0.600 mol of magnesium? Since the starting and ending units are both moles, the only factor you need is the mole ratio:

0.600 mol Mg × (1 mol O2)/(2 mol Mg) = 0.300 mol O2

Read the equation aloud as a check: two moles of magnesium require one mole of oxygen gas. The oxygen amount in moles should be half the magnesium amount, not twice as large. For more practice writing setups before doing arithmetic, use the IChC training and practice problems or browse the exam preparation articles.

Check for flipped ratios and wrong final units

Read the mole ratio in the direction you need

In the magnesium example, using (2 mol Mg)/(1 mol O2) would leave the starting mol Mg without a matching denominator. If you wrote only “mol” and left out the formulas, you could miss that mistake and report 1.20 mol O2. The check is to point to the formula you have, put its coefficient with its label on the bottom, and then do the same for the formula you want on top. Check the numbers as well as the labels: writing (2 mol O2)/(1 mol Mg) would cancel correctly but would assign the coefficients to the wrong substances.

Compare the surviving label with the question

Before you box the answer, compare its full label with the target you wrote at the start. If a mass problem leaves you with mol CO2, you have stopped one factor too early. If it leaves you with g CaCO3, you are still measuring the starting substance. Do not fix either result by relabeling the number. Go back to the first line where the wrong label survives, correct that factor, and calculate again.

Frequently asked questions

Can I use equation coefficients as a ratio of grams?
No. Use the coefficients as a ratio of moles. Convert between grams and moles using the molar mass of the substance you are measuring.

Which substance goes on the bottom of the mole ratio?
Put the substance you already have in moles on the bottom so its label cancels. Put the substance you want on top.

Do correct final units guarantee a correct answer?
No. Units can cancel even when you copy a coefficient incorrectly or use the wrong molar mass, so check the numbers in each factor too.

About the International Chemistry Competition: an online chemistry competition for high school students from around the world. Qualification Round 2027: submissions are open until Sunday, 3 January 2027. How the rounds work

Written by Julia Berens, Social Media Assistant of the IChC team.

More articles

All articles