How does a galvanic cell work when zinc and copper are in separate beakers? Zinc atoms release electrons at one metal surface, and dissolved copper ions take up electrons at the other. The wire provides a path for electrons between the metals. A salt bridge provides a different path, one for ions moving between the solutions. To work out which way the ions move, keep track of where each half-reaction adds or removes positive charge.
Picture a strip of zinc in a solution containing zinc ions, Zn2+, and a strip of copper in a separate solution containing copper(II) ions, Cu2+. Each metal strip is an electrode. Connect the electrodes by a wire through a device that draws current, and connect the solutions with a salt bridge containing an electrolyte such as potassium nitrate, KNO3. The two paths complete the circuit without requiring the two beakers to mix freely.
The setup separates a reaction that could otherwise happen at a single surface. If you put zinc metal directly into a copper(II) solution, copper can deposit on the zinc. In the separated cell, the metal surfaces are in different beakers, so the transfer of electrons can drive current through an external circuit. The OpenStax chapter on galvanic cells shows how the electrodes, wire, and salt bridge fit together.
At the zinc electrode, a zinc atom leaves the metal as a dissolved zinc ion. In the half-reaction, the two electrons it loses appear on the product side:
Oxidation: Zn(s) → Zn2+(aq) + 2e−
The electrode where oxidation occurs is the anode. The electrons released by oxidation enter the metal and move through the external circuit from the zinc anode toward the copper electrode. They do not travel across either beaker as free electrons in the solution.
At the copper surface, a dissolved copper(II) ion takes up two electrons and becomes a copper atom in the solid metal. This time, the electrons appear on the reactant side:
Reduction: Cu2+(aq) + 2e− → Cu(s)
The electrode where reduction occurs is the cathode. As the cell runs, the zinc strip loses metal, while copper is deposited on the copper strip. The wire carries electrons, not zinc atoms or copper ions. The copper that plates onto the cathode comes from the solution in that beaker.
In this galvanic cell, the zinc anode is the negative terminal and the copper cathode is the positive terminal. If a diagram labels conventional current in the wire, its arrow points from copper to zinc. That convention follows the direction positive charge would move, so it is opposite to the electron-flow arrow.
Start with the zinc side. Each zinc atom that is oxidized adds one Zn2+ ion to the solution. The electrons leave through the wire, so they do not balance the added positive charge in that beaker. Nitrate ions, NO3−, move from the bridge toward the zinc side. Their negative charge offsets the positive charge added by oxidation.
On the copper side, reduction removes Cu2+ ions from the solution. Each ion that becomes solid copper takes two units of positive charge out of the solution, leaving an excess of negative charge unless ions move to compensate. Potassium ions, K+, move from the bridge toward the copper side. They help replace the positive charge lost when copper ions are reduced. They do not replace copper ions as reactants in the half-reaction.
The bridge keeps the solutions close to electrically neutral. Potassium and nitrate ions carry charge through the bridge without appearing in the net redox equation. If you remove the bridge and leave the wire connected, a small charge imbalance builds up and quickly opposes further reaction. The wire alone cannot sustain the current. Conversely, if the bridge stays in place but you disconnect the wire, electrons no longer have an external path from zinc to copper.
Add the half-reactions on paper. The two electrons released at zinc match the two taken up at copper, so they cancel from the overall equation:
Zn(s) + Cu2+(aq) → Zn2+(aq) + Cu(s)
The cancellation does not mean that the electrons never moved. It means that the overall equation records what the cell consumes and produces, not the route that charge takes. For each zinc atom oxidized, the equation accounts for one copper ion reduced. In the wire, that paired change corresponds to a transfer of two electrons. In the solutions, it adds two units of positive charge on the zinc side and removes two on the copper side.
Draw the two beakers and try labeling the arrows without looking back. Write the half-reactions at the metal surfaces first. Draw the electron arrow through the wire from the side with electrons among the products to the side with electrons among the reactants. Then label the solution changes separately: positive charge is added on the zinc side and removed on the copper side. Use those two changes to place the nitrate and potassium arrows inside the bridge. Keeping the arrows on their own paths helps you spot a common mistake: sending electrons through the bridge just because they and nitrate ions both carry negative charge.
For more work with equations and diagrams, use the IChC chemistry learning resources or try the training and practice problems.
Which way do electrons flow in a zinc and copper cell?
They flow through the wire from the zinc anode to the copper cathode. Zinc oxidation releases electrons, and copper(II) reduction uses them.
Does the salt bridge carry electrons?
No. In a potassium nitrate bridge, nitrate ions move toward the zinc side and potassium ions move toward the copper side.
Why does the copper electrode gain mass?
Dissolved copper(II) ions gain electrons at the cathode and become solid copper, which deposits on the electrode.
About the International Chemistry Competition: an online chemistry competition for high school students from around the world. Qualification Round 2027: submissions are open until Sunday, 3 January 2027. How the rounds work