Why Do Ionic Compounds Conduct Electricity?

Blog › Chemistry Explained

· by Julia Berens · 4 min read

A bright lab bench holds a microscope and glassware filled with vivid blue, green, orange, yellow, and purple liquids beside a partially visible lab worker.

A dry crystal of sodium chloride conducts electricity so poorly that it acts as an insulator in an ordinary classroom test. Melt that same crystal and it can carry a current. Dissolve it in water and the solution can carry a current, too. So why do ionic compounds conduct electricity in some states but not others? Sodium chloride contains charged particles in all three cases. What changes is whether those particles can move through the sample.

Why do ionic compounds conduct electricity when their ions can move?

An electric current is a flow of charge. In a copper wire, mobile electrons carry that charge. In molten sodium chloride or saltwater, the charge carriers are ions: positively charged sodium ions, Na+, and negatively charged chloride ions, Cl−. The sample as a whole is electrically neutral because the positive and negative charges balance. That does not stop the charges from moving separately.

When two electrodes connected to a battery set up an electric field in a conducting liquid, positive ions drift toward the negative electrode, and negative ions drift toward the positive electrode. Both motions contribute to the current. A positive charge moving one way and a negative charge moving the opposite way count as current in the same direction, not as two currents that cancel. Inside the liquid, ions carry charge; in the metal wires, electrons do. The distinction between those two kinds of charge carrier also helps when you trace charge through a galvanic cell.

Solid sodium chloride has ions held in a crystal lattice

In a sodium chloride crystal, Na+ and Cl− ions occupy positions in a repeating three-dimensional pattern called a crystal lattice. Each sodium ion has chloride ions as its nearest neighbors, and each chloride ion has sodium ions as its nearest neighbors. The attractions between opposite charges help hold this arrangement together.

The ions are not perfectly still. They vibrate around their lattice positions, but vibrating in place is not the same as drifting across the sample. Think of a chloride ion moving a little to one side and then back again. It has moved, but it has not carried charge any farther through the crystal over that cycle. Under ordinary conditions, too few ions can travel through solid sodium chloride to carry an appreciable current, and the solid has no supply of mobile electrons like the one in a metal.

That is why “solid salt has no ions” is the wrong explanation for a dark indicator in a conductivity test. The ions are already there. Also, poor contact between dry salt grains and the electrodes can affect a measurement, but even good contact with a single dry crystal does not make its ions free to move.

Molten sodium chloride has mobile ions without water

When sodium chloride melts, its ions no longer occupy fixed positions in a crystal lattice. They still attract or repel one another according to their charges, but they can move past one another in the liquid. Apply an electric field, and their motion gains a slight bias: Na+ drifts one way and Cl− drifts the other.

Melting changes the physical state, not the identity of the ions. It does not turn Na+ into sodium metal or Cl− into chlorine gas. It also does not require water. That makes the molten sample a useful comparison: if liquid sodium chloride carries a current without any solvent, water cannot be a requirement for ionic conduction. The requirement is that charged particles can move.

Saltwater has mobile ions surrounded by water molecules

Dissolving is a different way to free ions from the lattice. A water molecule is electrically neutral, but its oxygen end is partially negative and its hydrogen ends are partially positive. Near a sodium ion, water molecules tend to orient their oxygen ends toward it. Near a chloride ion, they tend to point their hydrogen ends toward it. These attractions help stabilize the separated ions in solution. The process of water molecules surrounding dissolved ions is called hydration.

A chemical equation shows the change clearly: NaCl(s) → Na+(aq) + Cl−(aq). The label aq means the ion is in aqueous solution, surrounded by water molecules. The sodium and chloride ions can drift through the solution even as nearby water molecules continually change places. Dissolving does not create the ions from neutral sodium chloride molecules. It separates ions that were already present in the solid.

Compare saltwater with sugar water. Ordinary table sugar also dissolves, but mostly as neutral molecules. Those molecules can move through the water, yet they do not carry a net charge. Very pure water conducts only weakly, and adding sugar does not supply mobile ions the way adding salt does. The OpenStax explanation of electrolytes uses this distinction to explain why some dissolved substances make solutions conduct much better than others.

Reading a conductivity test without overclaiming

Suppose a teacher compares very pure water and a sodium chloride solution with the same low-voltage conductivity tester, holding the electrodes the same distance apart and dipping them to the same depth. The saltwater should give a much stronger reading. If the first sample is tap water instead, it may already give a reading because it can contain dissolved ions. A reading tells you how readily the sample carries a current under the test conditions, not which ions are in it. Electrode spacing, temperature, and the amount of dissolved salt can all affect the result.

For a written explanation, try naming the carrier and saying what it can do. Instead of “saltwater conducts because it is liquid,” write “saltwater conducts because dissolved Na+ and Cl− ions drift in an electric field.” Then apply the same test to a new example: solid potassium chloride, KCl, versus potassium chloride dissolved in water. Which ions are present in both, and what changes when the solid dissolves? Use that same particle-level approach when working through the IChC training and practice problems.

Frequently asked questions

Are there ions in dry table salt?
Yes. Sodium and chloride ions are already present in solid sodium chloride, but they are held in a crystal lattice and cannot readily move through it.

Is molten salt the same as saltwater?
No. Molten salt is salt made liquid by heating, while saltwater is a solution of salt in water. In both, mobile ions can carry current.

Do electrons carry current through saltwater?
In a typical conductivity test, electrons carry current through the metal wires. In the saltwater between the electrodes, dissolved ions carry the current.

About the International Chemistry Competition: an online chemistry competition for high school students from around the world. Qualification Round 2027: submissions are open until Sunday, 3 January 2027. How the rounds work

Written by Julia Berens, Social Media Assistant of the IChC team.

More articles

All articles