What Does an Environmental Chemist Do With a Water Sample?

Blog › Studies and Careers

· by Julia Berens · 5 min read

What does an environmental chemist do when a stream looks clear but might contain too much nitrate? Nitrate is dissolved in the water, so looking at the stream won't tell you how much is there. Answering that question takes more than running a test. Someone has to decide where and when to collect the water, check that the measurement is reliable, and explain what the result does and doesn't say about the stream.

What does an environmental chemist do before collecting water?

Suppose a watershed team wants to know whether nitrate concentrations differ above and below a tributary, a smaller stream that flows into a larger one. An environmental chemist helps turn that question into a sampling plan. The team might collect water upstream and downstream of the junction and take a separate sample from the tributary. The downstream site should be far enough from the junction for the waters to mix. Otherwise, a bottle filled near one bank might mostly contain water from just one of the two streams.

Timing matters, too. Samples taken on the same morning can show a difference between sites at that time. They can't tell the team whether the same difference occurs during a storm or persists through the year. If the goal is to understand how rain affects nitrate, the plan needs to include sampling under different conditions. The U.S. Geological Survey field manual for water quality data describes the practices behind consistent field measurements and sample collection.

From the stream to the lab

Follow the downstream sample. At the site, a field worker collects the water according to the sampling plan and labels the bottle with a unique sample ID. The field record connects that ID to the location, date, time, and conditions that might help explain the reading, such as recent rain. Some measurements, such as water temperature, are made on site because a reading from the bottle back at the lab would not represent the stream's temperature at collection.

The test method determines which container to use, how to preserve the sample, and how soon it must be analyzed. The lab records the sample's arrival and checks details such as the bottle's condition and whether it arrived within the required time. Some projects also require a chain of custody, a record of who handled the sample as it moved from the field to the lab. A precise instrument can't fix a mislabeled bottle or tell the analyst where an undocumented sample came from.

Measuring nitrate and checking the number

One way to measure nitrate is ion chromatography. The instrument carries part of the sample through a column that separates dissolved ions. Nitrate and other ions, such as chloride, pass through the column at different times under the method's conditions. A detector records signals as they come out. The analyst compares the nitrate signal with signals from standards, which are solutions with known nitrate concentrations, to calculate the concentration in the sample.

A number on the screen isn't enough. The analyst uses a blank, which should not contain measurable nitrate, to check for contamination. A check standard helps show whether the instrument still gives the expected result for a known concentration. The field team may also collect a duplicate at the same site and time. If the duplicate results differ more than expected, the team investigates rather than simply choosing the number that looks more plausible. What happens next depends on the problem: the analyst might repeat the measurement, or the team might need to collect another sample.

Reporting what the sample can support

A useful report links the result to the sample ID, site, collection time, and analytical method. It also states the units and any limits on how the result should be used. For nitrate, even milligrams per liter isn't specific enough. A lab can report the mass of the whole nitrate ion, NO3−, or just the mass of nitrogen in that nitrate. Those numbers are different for the same bottle of water. Before comparing results from two reports, check that both use the same reporting basis.

If the downstream result is higher than the upstream result, the chemist considers whether the difference is large enough to distinguish from measurement variability. Even a clear difference doesn't by itself prove where the nitrate came from. The tributary result can help the team decide where to investigate next, but the samples represent particular places and times. Likewise, a result reported below a stated reporting limit should not be read as zero, and a nitrate test alone cannot establish whether stream water is safe to drink.

High school courses and college labs that build these skills

In high school, start with chemistry and math. Chemistry helps you understand dissolved ions, concentrations, and dilutions. Algebra helps you use a calibration graph to turn a detector signal into a concentration. If your school offers statistics, use it to explore how much repeat measurements vary. Biology or environmental science adds context: learning how algae use nutrients helps explain why a watershed team might track nitrate in the first place.

You don't need access to a stream or an instrument to practice the reasoning. Ask a teacher about a supervised lab using known dilutions of food coloring. If the school has a colorimeter, measure each dilution and graph the readings against concentration. Then estimate the concentration of a sample your teacher prepared without telling you its value. Try measuring it more than once, and write down what the results suggest about the repeatability of your measurements.

In college, look for hands-on analytical chemistry labs. A quantitative analysis course gives you practice preparing standards, using pipettes, and checking results. An instrumental analysis lab lets you see what happens when a sample's signal falls outside the range covered by your standards. An environmental chemistry lab, field methods course, or supervised research project can connect these skills to actual samples. When comparing courses, ask whether students collect samples, work with the instruments, and write reports explaining the limits of their data.

If you want more practice with the chemistry behind these measurements, try the IChC training and practice problems. You can also explore other ways to use chemistry through our Studies and Careers articles.

Frequently asked questions

Do environmental chemists work outdoors or in a lab?
It depends on the job. Some environmental chemists collect samples or plan field studies, while others focus on lab measurements, quality checks, or interpreting results.

Does below the reporting limit mean there's no nitrate?
No. It means the lab did not report a concentration at or above that limit. The sample may still contain nitrate.

Which college lab should I look for first?
Look for quantitative analysis or analytical chemistry with a lab. Preparing standards, checking measurements, and explaining uncertainty are skills you can use before working with environmental samples.

About the International Chemistry Competition: an online chemistry competition for high school students from around the world. Qualification Round 2027: submissions are open until Sunday, 3 January 2027. How the rounds work

Written by Julia Berens, Social Media Assistant of the IChC team.

More articles

All articles